Analysis and Solution of Common Faults in Servo DrivesMar 09,20231. What should be done when the AC servo motor does not operate with pulse output?① Monitor the current value of the pulse output and whether the pulse output light of the controller is flashing to c...
Relevant Safety Measures and Precautions for Servo MotorsMar 02,2023In order to protect operators and machinery, and ensure the correct use of AC servo motors, please read this article carefully and learn about relevant safety precautions before installation.Ⅰ. Preca...
What Are the Control Methods of Servo Motors?Feb 16,2023If you have no requirements for the speed and position of the motor, as long as you output a constant torque, you only need to use the torque mode.If there is a certain accuracy requirement for positi...
Application Occasions and Installation of Servo Motor ControllerFeb 09,2023The servo motor controller is a key device in the numerical control system and other related mechanical control fields. It generally controls the servo motor through three methods of position, speed a...
What Are the Faults of AC Servo Motors That Need to Be Repaired?Dec 14,20221. AC servo motor maintenance movement phenomenonThere is movement during feeding, and the speed measurement signal is unstable, such as a crack in the encoder; the terminal is in poor contact, such a...
Are Servo Motors Repairable?Dec 13,20221. Principle of servo motorThe servo mainly relies on pulses for positioning. When the servo motor receives a pulse, it will rotate the angle corresponding to the pulse to achieve displacement. Becaus...
Common Servo Motor Fault and Maintenance KnowledgeOct 06,2022Ⅰ. What needs to be done before starting the AC servo motor?1. Measurement of insulation resistance (for low voltage motor should not be less than 0.5m).2. Measure the power supply voltage, check whe...
Differences Between Servo Drives and InvertersSep 08,2022The technology of AC servo itself draws on and applies the technology of frequency conversion. On the basis of the servo control of the DC motor, it is realized by imitating the control method of the ...
EN
Call us on: 
Email Us: 
1103, Block C, South Building, Luo Fang Road, Luohu District, Shenzhen, 518001, China 
